Etiquetas (Tags)
Catálogo
A carregar...
Unmatched is a highly asymmetrical miniature fighting game for two or...
In battle, there are no equals.Unmatched is a highly asymmetrical...
O-Matte standard size sleeves Sized for standard size cards, such as...
O-Matte standard size sleeves Sized for standard size cards, such as...
O-Matte standard size sleeves Sized for standard size cards, such as...
O-Matte standard size sleeves Sized for standard size cards, such as...
O-Matte standard size sleeves Sized for standard size cards, such as...
O-Matte standard size sleeves Sized for standard size cards, such as...
O-Matte standard size sleeves Sized for standard size cards, such as...
O-Matte standard size sleeves Sized for standard size cards, such as...
Set of four replica chrome center caps for 1979 TRX-4® Ford® Bronco...
Replacement part(s) for these models: T-Maxx Classic Model #49104-1
Replacement part(s) for these models: T-Maxx Classic Model #49104-1
Pair of 8x16x5 mm black rubber seal ball bearings. A step above...
Pair of 12x18x4 mm black rubber seal ball bearings. A step above...
The model kit has been specially designed for a large range of movement...
Size - 1/10 Top Speed - 60 mph Power 4s Brushless Battery &...
Size - 1/10 Top Speed - 60 mph Power 4s Brushless Battery &...
Size - 1/10 Top Speed - 60 mph Power 4s Brushless Battery &...
While these contain the same cards as the other Commander decks,...
Magic: The Gathering—FINAL FANTASY Commander deck contains the...
Witcher: Path of Destiny is a strategic tableau-building card game,...
LIMITADO A DUAS UNIDADES POR LOJA. Includes two Scarlet &...
Produtos visualizados
Discover new brilliance and maximum...
In the Legacy style, Legends of the...
Subcategorias
Give your Traxxas Maxx a complete refresh with this replacement hardware kit. Traxxas hardware kits replace the screws and fasteners on your vehicle with new factory-fresh hardware. Individual compartments keep everything organized with a handy label to measure and identify the parts. MAXX HARDWARE KIT FEATURESBlack oxide coating for improved rust...
Steering link, 5x117mm (1)/ drag link, 5x60mm (1)/ panhard link, 5x63mm (blue powder coated steel) (assembled with hollow balls) (for use with #8140X TRX-4® Long Arm Lift Kit)Revised steering links maintain ideal steering geometry when using a Long Arm Lift Kit. The blue powder coated steel finish provides durable protection and colorful style to your...
TRX-4 1979 Ford Bronco & F-150 Pro Scale LED Light Set All the lighting control of a full-scale truck is at your fingertips with the Pro Scale® LED light set for your TRX-4® 1979 Ford® Bronco or F-150® High Trail Edition™. Turn the headlights on and off and select high or low beams. Signal for turns with automatic cancellation or put on the hazard...
Wheels, wheelie bar, 6061-T6 aluminum (blue-anodized) (2)/ axle, wheelie bar, 6061-T6 aluminum (2)/ 10x15x4 ball bearings (4)Machined from tough 6061-T6 aluminum and hard-anodized in brilliant eye-catching colors, these wheelie bar wheels are the perfect finishing touch for your ride. Durable soft-compound tires reduce side-to-side movement for stable,...
Decal set, hull (green) (waterproof) (for Disruptor®) Replacement part for these models:Disruptor®
Replacement part for these models: X-Maxx® Ultimate XRT® Ultimate Accessory part for these models: X-Maxx® XRT®
Tinted windows for the 9712-series TRX-4m® Land Rover® Defender® bodyKeep the Fun Going Sale Accessory part for these models: TRX-4M™ 1/18 Ford® Bronco® TRX-4M™ 1/18 Land Rover® Defender®
Accessory part for these models: TRX-4MT™ 1/18 1979 Chevrolet® K10 Monster Truck TRX-4MT™ 1/18 1979 Ford® F-150® Monster Truck TRX-4M™ 1/18 1979 Chevrolet® K10 High Trail Edition™ TRX-4M™ 1/18 1979 Ford® F-150® High Trail Edition™
Differential housing halves (L&R) with pinion collar Replacement part for these models: T-Maxx®
Replacement part for these models: X-Maxx® Ultimate XRT® Ultimate Accessory part for these models: X-Maxx® XRT®
Replacement part for these models: X-Maxx® Ultimate XRT® Ultimate Accessory part for these models: X-Maxx® XRT®
Replacement part for these models: X-Maxx® Ultimate XRT® Ultimate Accessory part for these models: X-Maxx® XRT®
Replacement part for these models: X-Maxx® Ultimate XRT® Ultimate Accessory part for these models: X-Maxx® XRT®
Accessory part for these models: Slash® 4X4 Brushless Slash® 4X4 Ultimate Slash® 4X4 VXL EHD Slash® 4X4 VXL Slash® Brushless EHD Slash® Brushless Unassembled Kit Slash® Brushless Slash®
LED lights, wire harness (fits #9862 roll bar) Add more scale detail to your TRX-4M™ by replacing the replica lights in the 9862 roll bar with these bright LED lights. Includes wiring harness.
Wire harness and mount for 9790 trailer LED light kit. Accessory part for these models: TRX-4MT™ 1/18 1979 Chevrolet® K10 Monster Truck TRX-4MT™ 1/18 1979 Ford® F-150® Monster Truck TRX-4M™ 1/18 1979 Chevrolet® K10 High Trail Edition™ TRX-4M™ 1/18 1979 Ford® F-150® High Trail Edition™ TRX-4M™ 1/18 Ford® Bronco® TRX-4M™ 1/18 Land Rover® Defender®
Body, Ford F-150 (1979), complete, brown (painted, decals applied) (includes grille, side mirrors, door handles, windshield wipers, front & rear bumpers, clipless mounting) (requires #9288 inner fenders) (roll bar sold separately; choose #9262 chrome, 926TRX-4® 1979 Ford® F-150® body kits come fully-painted with clipless body mounts and pre-assembled...
Tie bars, front, 6061-T6 aluminum (blue-anodized)Replacement blue-anodized 6061-T6 aluminum front tie barsReplacement part for these models:Sledge®
Battery expansion kit (allows for installation of taller battery packs in Maxx® with standard chassis (329mm wheelbase))The battery expansion kit allows you to install taller batteries in the standard 329 mm wheelbase Maxx. Does not fit extended 352 mm wheelbase Maxx.
Accessory part for these models: TRX-4MT™ 1/18 1979 Ford® F-150® Monster TruckTRX-4M™ 1/18 1979 Ford® F-150® High Trail Edition™
Screw pin, 4x18mm (with threadlock) (6)Set of six 4x18 mm screw pins with hex-drive heads come with pre-applied threadlock. Replacement part for these models:Sledge®
Bulkhead, front or rearReplacement bulkhead fits front or rear Replacement part for these models:Sledge®
Drive cup, steel, extreme heavy duty (2)/ 4x17mm screw pins, heavy duty (2) (machined, heat treated)Give your E-Revo® the toughest driveline possible with these extreme heavy-duty drive cups. The drive cups are machined out of high-grade heat-treated steel to resist rounding out from dogbone contact. Includes heavy-duty 4x17 mm screw pins (2). Accessory...
Accessory part for these models:TRX-4® 1972 Chevrolet® Blazer® High Trail Edition™TRX-4® 1979 Chevrolet® Blazer®TRX-4® 1979 Ford® Bronco®TRX-4® Equipped with Traxx®TRX-4® Sport High Trail Edition™TRX-4® Sport
Wing (exocarbon)/wing mounts (2)/ washers (2)The XO-1® Exo-Carbon wing adds a glossy, high-tech carbon-fiber look to your supercar. The innovative Exo-Carbon finish forms a tough skin over the standard composite wing resulting in the quality and strength you expect along with the appearance of high-gloss carbon fiber. Includes mounts and washers.Keep the...
Body, Stampede® (also fits Stampede® VXL), blue (painted, decals applied) (assembled with front & rear body mounts for clipless mounting)
The slipper clutch rebuild kit refreshes the standard-duty slipper clutch with a new disc, friction pads (3), springs (2), dowel pin, 4 mm locknut and 5 mm locknut. Fits 5556 pressure plate and hub.
The slipper clutch rebuild kit includes a new steel disc, friction pads (3), spring, pin, 5x8 washer, 4 mm locking nut, and 5 mm locking nut. Fits 5351 pressure plate and hub.
Is it time to upgrade your Slash® with an all-new look? This clipless polycarbonate body features the hottest ProGraphix® paint with pre-applied decals. There’s no need to trim the body because Traxxas pre-painted bodies come ready to mount right out of the bag. Body comes assembled with front and rear clipless latches. Older Slash chassis without...
Replacement part for these models: Blast
Replacement part for these models: Blast
A New Level of Crawling Capability Add enhanced crawling capability to your TRX-4M with the new High/Low 2-speed transmission. It adds a low gear option for incredible rock-crawling torque, while keeping the standard high gear ratio for general driving. It comes fully assembled and ready to install with a new Titan® 180 motor and mounting bracket. Note:...
FOR ESC USE ONLY The Traxxas 4s connector adds single 4s LiPo compatibility to the VXL-6s speed control. Requires 8527 jumper plug for unused battery lead. (Factory replacement plugs for 3465 and 3496 ESCs)
Replacement metal gear set for 2065R servo. Gears may also be used to upgrade the 2065A and 2065T servos. Gears do not fit 2065 or 2065X servos.
Replacement quick-release motor collet includes 4x3 stainless grub screw with applied threadlock and 10 mm wrenches (2) Replacement part for these models: Spartan® SR
54-tooth spur gear (1.0 metric pitch) is machined from hardened steel with extra-wide steel teeth for ultimate power handling and durability. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for...
Body, Maxx Slash®, Rock n' Roll (painted)/ decal sheet (assembled with body support, body plastics, & latches for clipless mounting)Is it time to upgrade your Maxx® Slash® with an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint with pre-applied decals. Maxx Slash bodies come fully-assembled and ready to mount with...
Wire harness, LED lights/ zip ties (8) (fits #10350 boat trailer)Give your Traxxas boat trailer even more scale detail with this LED light kit. The light kit requires the 10348 wire harness extension when installing lights in the 10350 boat trailer.Accessory part for these models:Traxxas Boat Trailer
Body, Stampede® VXL, orange & blue (painted, decals applied)Is it time to upgrade your Stampede® with an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint with pre-applied decals. There’s no need to trim the body or drill mounting holes because Traxxas pre-painted bodies come ready to mount right out of the bag.Keep...
The 3-channel TQi transmitter combines a full complement of tuning features with the long-range convenience of 2.4 GHz technology. Automatic model recognition instantly recalls your settings for up to 30 Traxxas Link-enabled models. The TQi's ergonomic design provides all-day driving comfort, with an internal antenna that is impervious to damage. For even...
Springs, blue (front) (2)Blue springs for rear Traxxas Ultra Shocks (2).Accessory part for these models:BIGFOOT® No. 1 Officially Licensed ReplicaBigfoot® Officially Licensed ReplicaFord® F-150 RaptorFord® F-150® RaptorHoss® 4X4 VXLRustler® BrushlessRustler® VXLRustler®Slash 2WD Unassembled KitSlash VXLSlashSlash® Brushless Unassembled KitSlash®...
Springs, blue (rear) (2)Blue springs for rear Traxxas Ultra Shocks (2).Accessory part for these models:BIGFOOT® No. 1 Officially Licensed ReplicaBigfoot® Officially Licensed ReplicaFord® F-150 RaptorFord® F-150® RaptorHoss® 4X4 VXLRustler® BrushlessRustler® VXLRustler®Slash 2WD Unassembled KitSlash VXLSlashSlash® Brushless Unassembled KitSlash®...
Extreme heavy-duty rear steel CV (constant velocity) driveshafts feature larger 6 mm stub axles to work specifically with the Extreme Heavy Duty Upgrade Kit. Designed for intense high-power applications, these shafts are built to withstand the brutal torque from the 540XL motor and the massive grip of huge Sledgehammer® tires.
Driveshafts, rear, steel-spline constant-velocity (complete assembly) (2)Steel rear constant-velocity driveshafts offer the ultimate in torque handling and efficient power transfer. The outer U-joints are lubricated and sealed by a rubber boot for maximum protection against the elements, and the U-joint pins are held captive so you never have to worry...
Wheelie bar, black chrome (assembled)/ wheelie bar mountDeveloped for drag racing, this extended wheelie bar features 5 height positions and two wheel sizes for maximum customization. Two heavy-duty mounts are included, one for the standard chassis and one for low-CG versions. Take control of your vehicle’s drag strip performance with this...
Traxxas LED light kits are built tough, with factory fit and finish for easy installation. Designed specifically for the Stampede®, the kit includes 4 brilliant white forward-facing LEDs and two rear-facing red LEDs to enhance rear visibility. The kit is fully waterproof, and includes everything needed for installation. (Rear bumper not compatible with...
Heavy-duty suspension arms for 2WD Slash®, Stampede®, and Rustler® incorporate our latest proprietary composite material. Traxxas designed this composite specifically for high loads and hard landings with just the right amount of flex to resist breaking—even in cold weather. Whether you’re sending it at the skate park, or preparing for the next speed run,...
Aggressive BFGoodrich® KR3 tires with foam inserts come pre-glued and mounted to black replica 101 Method® Race Wheels with red beadlock-style rings. Wheels require 17 mm hex hub. Sold as a pair.. Accessory part for these models: Unlimited Desert Racer®