Etiquetas (Tags)
Catálogo
A carregar...
Local do Evento: CoimbraShopping Piso 1(1º andar em frente às escadas...
Local do Evento: CoimbraShopping Piso 1(1º andar em frente às escadas...
Forge your path through the Rift with this official Riftbound: Unleashed...
Forge your path through the Rift with this official Riftbound: Unleashed...
Forge your path through the Rift with this official Riftbound: Unleashed...
Forge your path through the Rift with this official Riftbound: Unleashed...
The village of Buttonville is undoubtedly the most glorious village of...
Set of four 17 mm wheel nuts are serrated for extra bite on the wheel to...
The Dungeons & Dragons Starter Set is a legendary "all-in-one" box...
This portfolio contains 14 high-clarity pages, allowing you to store up...
This fourth Wingspan expansion explores the birds of Mexico, Central...
The cooling system picks up water from underneath the boat, circulates...
Pré-Encomenda – disponibilidade sujeita a confirmação Este produto...
Data de lançamento prevista: 22/05/26 Pré-Encomenda – disponibilidade...
Data de lançamento prevista: 22/05/26 Pré-Encomenda – disponibilidade...
Data de lançamento prevista: 22/05/26 Pré-Encomenda – disponibilidade...
Data de lançamento prevista: 22/05/26 Pré-Encomenda – disponibilidade...
Data de lançamento prevista: 22/05/26 Pré-Encomenda – disponibilidade...
Replacement left and right steering blocks. Steering blocks require 5196A inner bearings.
High stability combination trim tabs / turn fins (L&R) with 4x12 mm stainless screws (4)
Replace your worn or damaged Maxx Slash® center skid plate with this factory-fresh replacement. Includes screws.
Replace your worn or damaged front and rear Maxx Slash® skid plates with factory-fresh replacements.
Grille and headlights for the 11011-series TRX-4® Nissan® Pathfinder®. Includes grille retainer, headlight housings (2), lenses (2), 2.6x10 mm screws (8).
Replacement front outer stub axle assembly for the Extreme Heavy Duty Upgrade Kit. (Stub axles are designed to fit the 9080-series Extreme Heavy-Duty Upgrade Kit differential yokes only and will not fit standard driveshafts)
Mini GTR shock springs use high-quality spring steel with a natural finish. GTR springs are offered in different rates to tune your suspension performance or compensate for lighter or heavier vehicle configurations. The higher the rate, the stiffer the spring. (1.36 rate black stripe) (Sold in pairs)
Replacement extra long (185 mm) T-Lock cable for 336 mm wheelbase TRX-4® models equipped with the Long Arm Lift Kit. Stock part(s) for these models:TRX-4 Ford F-150 High Trail Edition92046-4
Add a touch of style to your Unlimited Desert Racer® with this satin black chrome-plated front bumper and bumper support.
4x10 mm countersunk machine screws with hex drive heads. Set of six.
Molded hood vents and retainers for 8213-series TRX-4® Sport clipless bodies
Replacement bed rails and tailgate cover. Includes 3 x 10 mm screws (4) and 3 x 8 mm screws (2). Fits 8187-series TRX-4® Sport bodies.
Replacement front driveshaft with 6 mm axle for the Extreme Heavy Duty Upgrade Kit. Fits left or right. (Driveshafts are for use with the 9080-series upgrade kit only and will not fit standard suspension parts)
GTR shock springs use high-quality spring steel with a durable white powder-coated finish. GTR springs are offered in different rates to tune your suspension performance or compensate for lighter or heavier vehicle configurations. The higher the rate, the stiffer the spring. (1.0 rate tan stripe) (Sold in pairs)
Machined from tough 6061-T6 aluminum and hard-anodized in brilliant eye-catching colors, these wheelie bar wheels are the perfect finishing touch for your ride. Durable soft-compound tires reduce side-to-side movement for stable, consistent wheelies. Four 10x15x4 mm bearings are used to reduce friction and increase precision. Includes axles (2) and screws...
Replacement front shock tower for the Extreme Heavy Duty Upgrade Kit. (Shock tower is for use with the 9080-series upgrade kit only and will not fit standard suspension parts)
Designed specifically for 3.8" Geode wheels, these attractive rings feature molded-in color for good looks that last. The durable design protects the rim/tire join when the terrain turns treacherous. Includes 2.5x8 mm screws (24). (Sold in pairs)
Raptor R™ replica front bumper with bumper support and light covers. Includes 2.5x10 mm screws (4).
Mounts, chassis brace (front & rear)
Set of six 3x10 mm shoulder screws with hex-drive heads
Stub axle assembly, outer (front or rear) (assembled with internal-splined half shaft)
Battery hold-down comes with battery clip, hold-down post, foam spacer, and screw pin. (Fits 4-Tec® 2.0 vehicles with 256 mm wheelbase)
Front and rear fender flares and mounts for the 9211 TRX-4® Ford® Bronco body. Includes 2x8 mm screws (24).
Replacement battery door includes battery strap and latch retainers (2) Unlimited Desert RacerModel #85086-4
Set of ten 6x9x0.5 mm PTFE-coated washers Ford Fiesta ST Rally BL-2sModel #74154-4Raptor R 4X4 Ultimate (101177-4) Front Three-Quarter View (Gold)Ford Raptor R 4X4 UltimateModel #101177-4 Jato 4X4 BL-2sModel #90154-4 Jato 4X4 VXL-4sModel #90386-4 Rustler 4X4 VXLModel #67376-4 Slash 4X4 VXLModel #68386-4 Stampede 4X4 VXLModel #90376-4 T-Maxx 3.3Model...
Bumper, front (chrome)/ bumper mount (2)/ 3x10 BCS (2)
Body mounts (front & rear) (for clipless body mounting)
Replacement electronics tray includes receiver box cover, seals, stuffing tube clamp, and stainless hardware
The Maxx® wheelie bar is made from our toughest composite material and available in several eye-catching colors. The Maxx wheelie bar helps prevent backflips under full-throttle acceleration and flexes to absorb impacts on less-than-perfect landings. It also features a convenient handle to transport your Maxx to the next adventure.
Machined from tough 6061-T6 aluminum and hard-anodized in brilliant eye-catching colors, these wheelie bar wheels are the perfect finishing touch for your ride. Durable soft-compound tires reduce side-to-side movement for stable, consistent wheelies. Four 10x15x4 mm bearings are used to reduce friction and increase precision. Includes axles (2) and screws...
Bulkhead, rear (lower)/ motor mount washers (steel) (4)/ 4x18mm BCS (4)
Machined from tough 6061-T6 aluminum and hard-anodized in brilliant eye-catching colors, these wheelie bar wheels are the perfect finishing touch for your ride. Durable soft-compound tires reduce side-to-side movement for stable, consistent wheelies. Four 10x15x4 mm bearings are used to reduce friction and increase precision. Includes axles (2) and screws...
Caster blocks (c-hubs), 6061-T6 aluminum (green-anodized), left & right Replacement part(s) for these models: X-MaxxModel #77096-4 X-Maxx UltimateModel #77097-4 X-Monster ChassisModel #77036-4 XRTModel #78086-4 XRT UltimateModel #78097-4
Left and right aluminum stub axle carriers improve the appearance, ruggedness, and control of your X-Series™ vehicle. The billet 6061-T6 aluminum construction adds strength and precision where you want it most. The brilliantly anodized finish adds vibrant color to your vehicle and features a high-contrast laser etched TRX® logo. Genuine Traxxas...
Steering blocks, 6061-T6 aluminum (green-anodized), left & right Replacement part(s) for these models: X-MaxxModel #77096-4 X-Maxx UltimateModel #77097-4 X-Monster ChassisModel #77036-4 XRTModel #78086-4 XRT UltimateModel #78097-4
Heavy-duty X-Series™ suspension arms utilize our latest proprietary composite material for extreme durability. Traxxas designed this composite specifically for high loads and hard landings with just the right amount of flex to resist breaking-even in cold weather. Whether you're sending it at the skate park, or launching off a ramp, these arms are built...
Heavy-duty X-Series™ suspension arms utilize our latest proprietary composite material for extreme durability. Traxxas designed this composite specifically for high loads and hard landings with just the right amount of flex to resist breaking-even in cold weather. Whether you're sending it at the skate park, or launching off a ramp, these arms are built...
Heavy-duty X-Series™ suspension arms utilize our latest proprietary composite material for extreme durability. Traxxas designed this composite specifically for high loads and hard landings with just the right amount of flex to resist breaking-even in cold weather. Whether you're sending it at the skate park, or launching off a ramp, these arms are built...
Give your Pro Scale® Sand Car a dramatic new look with this underbody LED light kit. Lights come pre-mounted to replacement nerf bars for easy installation. Light kit includes 3-volt power supply, wire harnesses, and mounting hardware.
Fender retainers (front & rear, left & right) (fits #8050 series bodies) Replacement part(s) for these models: TRX-4 Crawler KitModel #82216-4 TRX-4 Land Rover DefenderModel #82256-4
Camber link set (plastic/ non-adjustable) (front &rear) (black) Replacement part(s) for these models:BIGFOOT 4X4 BL-2sModel #67134-4 Rustler 4X4 BL-2sModel #67164-4 Slash 4X4 BL-2sModel #68154-4 Stampede 4X4 BL-2sModel #67154-4
Replacement rear planetary differential gear set includes 47-tooth ring gear and 12-tooth input gear. (Pinion gear does not work with optional center differential or slipper clutch)
Heavy-duty WideMaxx® suspension arms utilize our latest proprietary composite material for extreme durability. Traxxas designed this composite specifically for high loads and hard landings with just the right amount of flex to resist breaking—even in cold weather. Whether you’re sending it at the skate park, or launching off a ramp, these arms are built...