Etiquetas (Tags)
Catálogo
A carregar...
The Digimon Card Game Limited Pack Billion Bullet LM06 is a special,...
The Bandai One Piece Card Game Official Sleeves Vol. 12 Imu are a pack...
The Bandai One Piece Card Game Official Sleeves Vol. 12 Gear 5 Luffy are...
The Bandai One Piece Card Game Official Sleeves Vol. 12 Sabo are a set...
The One Piece Card Game Official Sleeves Vol. 12 Gold D. Roger are...
The One Piece Card Game Official Sleeves Vol. 5: Portgas.D.Ace are an...
ONE PIECE Card Game Official Sleeves Vol. 5 Jewelry Bonney are card...
LIMITADO A 3 DISPLAYS POR CLIENTE.24 Boosters = DISPLAY
Possibilidade de alocações, não podemos garantir as quantidades da sua...
Possibilidade de alocações, não podemos garantir as quantidades da sua...
Possibilidade de alocações, não podemos garantir as quantidades da sua...
Possibilidade de alocações, não podemos garantir as quantidades da sua...
Possibilidade de alocações, não podemos garantir as quantidades da sua...
Possibilidade de alocações, não podemos garantir as quantidades da sua...
For use in tabletop RPG games (such as Dungeons & Dragons). This set...
Durante o Período Nanban, o Japão assistiu ao intercâmbio cultural e...
Set of ten 6x9x0.5 mm PTFE-coated washers Ford Fiesta ST Rally...
Steering bellcranks (left & right)/ draglink (6061-T6 aluminum,...
Take your X-Series vehicle to the next level with this aluminum...
Bumper, front (chrome)/ bumper mount (2)/ 3x10 BCS (2)
The Yu-Gi-Oh! The Chronicles Deck: The Fallen & The Virtuous...
O trabalho de entregador de pizzas sempre foi bastante monótono… até...
Subcategorias
Body, Rustler® 4X4, red (painted, decals applied) (assembled with front & rear body mounts and rear body support for clipless mounting)
Body, Rustler® (also fits Rustler® VXL), orange (painted, decals applied) (assembled with front & rear body mounts for clipless mounting)
Transmitter, TQi Traxxas® Link enabled, 2.4GHz high output, 2-channel (transmitter only)
The Maxx differential output yoke comes assembled with external-spline half shaft. Fits front or rear. Does not fit Maxx with narrow suspension.
Box, receiver (sealed)/ wire cover/ foam pads/ silicone grease/ 3x15 CS (4)
Body, 2017 Ford Raptor®, heavy duty (clear, requires painting)/decals (includes latches and latch mounts for clipless mounting) The clear 2017 Ford Raptor body comes fully trimmed and ready to paint with decal sheets, window masking, and pre-applied overspray film. The body also includes clipless body latches, body accessories, and mounting hardware.
Increase the precision and durability of your Maxx® or Maxx® Slash® with this aluminum servo horn. Machined from tough 6061-T6 aluminum, the servo horn adds colorful style with a brilliant anodized finish. Ideal for high-power upgraded servos, the servo horn integrates perfectly with the upgraded 10246-series aluminum bellcranks. Genuine Traxxas...
Shock springs for 1/10 scale XX-long GTR shocks use high-quality spring steel with a durable white powder-coated finish. GTR springs are offered in different rates to tune your suspension performance or compensate for lighter or heavier vehicle configurations. The higher the rate, the stiffer the spring. (1.004 rate blue stripe) (Sold in pairs)
Shock springs for 1/10 scale long GTR shocks use high-quality spring steel with a durable white powder-coated finish. GTR springs are offered in different rates to tune your suspension performance or compensate for lighter or heavier vehicle configurations. The higher the rate, the stiffer the spring. (0.892 rate blue stripe) (Sold in pairs)
TQi 2.4 GHz High Output radio system, 4-channel with Traxxas® Link Bluetooth® module, TSM® (4-ch transmitter, 5-ch micro receiver)
Set of six 3x10 mm washer-head machine screws with Phillips-drive heads
Body, Slash® VXL 2WD (also fits Slash® 4X4), Fox® Edition (painted, decals applied) (assembled with front & rear latches for clipless mounting) Slash 2WD BL-2sModel #58334-4 Slash 2WD BL-2s KitModel #58314-4 Slash 2WD VXLModel #58276-74 Slash 2WD VXLModel #58376-74 Slash 2WD XL-5 w/BatteryModel #58234-8 Slash 4X4 VXLModel #68386-4 Slash 4X4 VXL...
Replacement green whip light for the Pro Scale® Sand Car with Flex-Tech™ spring-loaded mount. Includes 3x12 screws (2). Fits left or right side. Sold individually. Pro Scale Sand CarModel #109076-4
Suspension arms, red, front/rear (left & right), heavy duty (2)
Replacement left and right stub axle carriers for the Extreme Heavy Duty Upgrade Kit with 3x41 mm hinge pins (2) and 3x20 mm screws (2). (Axle carriers are for use with the 9080-series upgrade kit only and will not fit standard suspension parts)
Replacement left and right caster blocks for the Extreme Heavy Duty Upgrade Kit with 3x32 hinge pins (2) and 3x20 screws (2). (Caster blocks are for use with the 9080-series upgrade kit only and will not fit standard suspension parts)
Replacement left and right steering blocks for the Extreme Heavy Duty Upgrade Kit with 3x20 mm screws (2). (Steering blocks are for use with the 9080-series upgrade kit only and will not fit standard suspension parts)
Chassis brace (T-Bar) (center), 6061-T6 aluminum (red-anodized) Jato 4X4 BL-2sModel #90154-4 Jato 4X4 VXL-4sModel #90386-4
The rear clipless body mount adapter with inserts (2) secures to the front shock tower to provide a firm base for clipless bodies.
Set of four replica chrome center caps for 1979 TRX-4® Ford® Bronco wheels. Includes decal sheet. (Requires 8255A extended thread stub axles)
Replacement part(s) for these models: T-Maxx Classic Model #49104-1
Replacement part(s) for these models: T-Maxx Classic Model #49104-1
Replacement vinyl antenna caps help protect the vital end of your antenna from rollover damage. The spool can be used to wrap up excess antenna wire length.
Pair of 8x16x5 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal bearings offer an even tighter seal for ultimate protection and less maintenance in dirty environments.
Pair of 12x18x4 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal bearings offer an even tighter seal for ultimate protection and less maintenance in dirty environments.
2.5x8 mm countersunk machine screws with hex drive heads. Set of six.
Servo, digital high-torque/high-speed, metal gear (ball bearing), waterproof
The Pro Scale® Aluminum Wheel System gives you maximum flexibility to create custom wheels for your Maxx Slash® and Unlimited Desert Racer®. These beadlock rings are machined from ultra-tough 6061-T6 aluminum and beautifully anodized in eye-catching color.
The Pro Scale® Aluminum Wheel System gives you maximum flexibility to create custom wheels for your Maxx Slash® and Unlimited Desert Racer®. These wheel centers are made from ultra-tough 6061-T6 aluminum and beautifully anodized in eye-catching color.Wheels are fully customizable with a complete line of beadlock rings and wheel washers to complete the...
Combine this sleek receiver box with the 5394X forward-only kit to trim weight from your Revo® for maximum track performance. The compact box features a tight-fitting, contamination-resistant cover, and an integrated on-off switch mount. The box can accommodate 4 AA cells, or a 5-cell rechargeable NiMH flat-pack. There's even a built-in personal...
Hitch, boat trailer (top & bottom)/ 3x12mm BCS (black stainless) (2)/ 3x15mm BCS (black stainless) (1)
Rally tires offer superior traction on pavement, dirt, gravel, and more with a unique directional tread pattern captured in high-grip rubber. Tires come pre-glued and mounted with foam inserts to black 12-spoke Rally wheels. TSM®-rated for high-speed applications. (Fits 12 mm hex, 4WD front or rear, 2WD rear only)
Driveshaft, center, plastic (black)/ screw pin
LED light kit, Mini XRT®, complete (includes front bumper with LED lights, roof skid plate with LED lights, 3-volt accessory power supply, and power tap connector (with cable) (fits #10712 body)
Caster blocks (c-hubs), extreme heavy duty, black (left & right)/ 3x32mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)
Steering blocks, extreme heavy duty, black (left & right)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)
Shock shaft, 92mm (GTX) (steel, chrome finish) (2) (assembled with rod ends & hollow balls)
Fenders, inner (narrow), front & rear (2 each)/ rock light covers (8)/ body mount/ 2.5x6 CS (10) (for clipless body mounting) Replacement part(s) for these models: TRX-4 Land Rover DefenderModel #82256-4
Wing/ wing washer (red)/ 4x12mm FCS (2) Replacement part(s) for these models:Jato 4X4 BL-2sModel #90154-4Jato 4X4 VXL-4sModel #90386-4SledgeModel #95096-4
Bumper, front/ bumper mount (fits 2WD Slash®) (for LED light kit installation)
Suspension arm, lower, green (1) (right, front or rear) (for use with #7895 X-Maxx® WideMaxx® suspension kit)
Transmitter, TQi Traxxas® Link enabled, 2.4GHz high output, 4-channel (transmitter only)
Extreme 3s Performance. Compact Size.Mini XRT® is a true rocket with full 1/10 scale Velineon® 3s brushless power in a compact, take-anywhere size. Mini XRT lives up to its name with unprecedented 55+ mph speed and ferocious acceleration, backed by race-inspired engineering and unrivaled toughness. Mini XRT shatters all expectations with big-scale...
Carriers, stub axle, rear, extreme heavy duty, black (left & right)/ 3x31mm hinge pins (2)/ 3x18mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit)
Steering blocks, extreme heavy duty, black (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit)
Black Extreme Heavy-Duty Caster Blocks (L&R) Caster blocks (c-hubs), extreme heavy duty, black (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180 and 9181 upgrade kit)
The waterproof BL-2s™ speed control delivers all the benefits of brushless technology with the safety and convenience features you expect from Traxxas. Built-in low-voltage detection, thermal shutdown protection, and EZ-Set® one button programming make BL-2s reliable and easy to operate.