Etiquetas (Tags)
Catálogo
A carregar...
The newest Gundam to appear in Bandai's HGCE REVIVE lineup is Freedom...
[Includes]: Shield gunMjolnirMjolnir baseMA form display support...
Broly, the legendary Super Saiyan will be available in his new design...
All in one case for organizing and transporting your sports memorabilia...
"Black War Greymon" from "Digimon Adventure 02" is now available as...
Bumper, front/ bumper mount (fits 2WD Slash®) (for LED light kit...
Create thrilling adventures with this revised and expanded Dungeon...
Suspension arm, lower, green (1) (right, front or rear) (for use with...
Transmitter, TQi Traxxas® Link enabled, 2.4GHz high output, 4-channel...
Extreme 3s Performance. Compact Size.Mini XRT® is a true rocket with...
Extreme 3s Performance. Compact Size.Mini XRT® is a true rocket with...
Extreme 3s Performance. Compact Size.Mini XRT® is a true rocket with...
Extreme 3s Performance. Compact Size.Mini XRT® is a true rocket with...
Carriers, stub axle, rear, extreme heavy duty, black (left & right)/...
Steering blocks, extreme heavy duty, black (left & right)/ 3x26mm...
Black Extreme Heavy-Duty Caster Blocks (L&R) Caster blocks (c-hubs),...
What's in the box?1 villain mover, 2 dice, 1 realm (board), 30 villain...
Produtos visualizados
Paris 1889. A Exposition Universelle...
Viaje para a Jerusalém de há 2...
Subcategorias
Bumper, frontReplacement front bumperReplacement part for these models: Maxx®
Bulkhead tie bar, rear, upper (1)/ lower front (1)/ lower rear (1) (steel) Steel rear upper and lower (2) bulkhead tie barsReplacement part for these models: Maxx®
Bulkhead tie bar, front, upper (1)/ lower (2) (steel) Steel front upper and lower (2) bulkhead tie barsReplacement part for these models:Maxx®
Restore your TRX-4 to peak performance with this bearing kit. The bearing kit swaps out the standard bearings with new factory-fresh replacements. Individual compartments keep everything organized in the box with a handy label to measure and identify the parts.
A Tougher, Wider Stance The Traxxas X-Maxx is a new breed of monster truck with a tough-as-nails attitude, brutal power, and unrivaled durability. The WideMaxx kit builds on the X-Maxx’s already legendary performance by widening the stance 60 mm for even greater cornering stability. Take your X-Maxx to the next level with the WideMaxx kit and get ready...
The differential locker halves replace the gears in your 1/16 scale front or rear differential to send equal power to both wheels for maximum traction. Two halves are required per differential. Recommended for off-road use only. Replacement part for these models: 1/16 Summit™ Accessory part for these models: 1/16 E-Revo® VXL 1/16 Slash 4WD 1/16 Slash® 4X4
Plate, motorThis brightly-anodized aluminum motor plate keeps your motor tight during intense high-flying action with a touch of style. Replacement part for these models:Ford Fiesta® ST RallyFord® Fiesta® ST RallyRustler® 4X4 BrushlessRustler® 4X4 VXLRustler® 4X4Slash 4X4 UltimateSlash® 4X4 Ultimate
Body conversion kit, Slash 4X4 (includes front & rear body mounts, latches, hardware) (for clipless mounting)The Slash® 4X4 clipless body conversion kit allows you to convert your 1/10 scale 4X4 Slash chassis and body to the convenience and style of clipless body mounting. Wide latch mounts cover the existing body mount holes to provide a secure...
Replacement part for these models: Revo® Slayer® Pro 4X4 Summit T-Maxx® Unlimited Desert Racer® X-Maxx® XRT® Accessory part for these models: Revo® Summit
Replacement part for these models: Maxx®
Take advantage of the full USB-C standard with the Traxxas 100-watt USB-C power cable. Not all USB-C cables are created equal. When combined with the 2912 Traxxas 45-watt power supply, the Traxxas USB-C power cable is guaranteed to maximize output for fast, reliable charging.
Take advantage of the full USB-C standard with the Traxxas USB-C 45-watt power adapter. Not all power adapters are created equal. When combined with the 2916 Traxxas 100-watt USB-C cable, the Traxxas 45-watt power adapter is guaranteed to maximize output for fast, reliable charging. Power Adapter Features: 45-watt output Single USB-C port 39 x 39 x 47 mm
The CV driveshaft rebuild kit includes all the hardware needed to rebuild two front or center driveshafts Accessory part for these models: TRX-4M™ 1/18 Land Rover® Defender® TRX-4M™ 1/18 1979 Chevrolet® K10 High Trail Edition™ TRX-4M™ 1/18 1979 Ford® F-150® High Trail Edition™ TRX-4M™ 1/18 Ford® Bronco®
Add strength and style to your X-Truck™ with these aluminum motor mounts. The mounts are machined from tough 6061-T6 aluminum for unbeatable toughness with a brilliant anodized finish and laser-etched logo. Genuine Traxxas accessories are made by Traxxas, for Traxxas, to guarantee a perfect factory fit every time. Aluminum Motor MountsMilled from...
Pro Scale® LED light set, front & rear, complete (includes light harness, zip ties (6)) (fits #9811 body) Add scale lighting to your 1/18 scale TRX-4M™ Chevrolet® K10 for an extra layer of fun and good looks. The Pro Scale® Lighting Kit adds working headlights, tail lights, brake lights, and hazard lights that respond precisely to your inputs....
Driveshaft, steel constant-velocity (shaft only, 96mm) (1)96 mm steel constant-velocity driveshaft Replacement part for these models:Unlimited Desert Racer®
Designed for power-hungry drivers who push their Sledge to the extreme, the heavy-duty 52-tooth Mod 1 (1.0-metric pitch) spur gear is machined from hardened steel for extra-long life. These let you fine-tune the performance of your Sledge. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult...
Rear bumper and skid plate with tie bar mount and 2 3x25 mm screws Replacement part for these models: Sledge®
Front bumper and skid plate with tie bar mount and 2 3x25 mm screws Replacement part for these models: Sledge®
190 mm steel CV driveshaft is a direct replacement for the X-Maxx® WideMaxx® suspension kit Replacement part for these models: XRT® Accessory part for these models: X-Maxx®
Replacement gear set for 2090 servo Replacement part for these models: Maxx®
Steering blocks, left & right/ 4x16mm BCS (4)/ M4x0.7 NL (4) Left and right steering blocks with 4x16 mm screws (4) and washers (4) Replacement part for these models: Sledge®
Wing, green/ 4x12mm FCS (4) Green XRT® wing with 4x12 mm screws (4)
Accessory part for these models: Ford® F-150® Raptor R™ 4X4 Ford® Fiesta® ST Rally Rustler® 4X4 VXL Rustler® 4X4 Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4 Stampede® 4X4 VXL Stampede® 4X4
Traxxas aluminum steering blocks combine total steering accuracy with bulletproof strength. Machined from solid 6061-T6 aluminum and protected with a brilliant anodized finish, these high-grade hop-up parts provide razor-sharp handling and high-tech style.
Left and right green aluminum caster blocks improve the appearance, ruggedness, and control of your Traxxas model. The billet 6061-T6 aluminum construction adds strength and precision where you want it most. The brilliantly-anodized finish adds vibrant color to your vehicle and features a high-contrast laser etched TRX logo.
Traxxas aluminum shock towers are made from tough 7075-T6 aluminum for extra strength and support and finished off with brilliant anodizing for a touch of style. Our shock towers are precision-machined for a perfect factory fit to maintain your vehicle’s race-bred geometry. Includes body mount bracket, shock mounting posts, and screws.
Traxxas aluminum shock towers are made from tough 7075-T6 aluminum for extra strength and support and finished off with brilliant anodizing for a touch of style. Our shock towers are precision-machined for a perfect factory fit to maintain your vehicle’s race-bred geometry. Includes body mount bracket, shock mounting posts, and screws.
Add vibrant color to your Rustler 4X4® with this functional rear wing. The wing reduces drag while still providing valuable downforce for high speed stability.The wing mounts directly to the internal body reinforcements for lasting durability. Includes hardware.
Traxxas aluminum stub axle carriers add the strength of 6061-T6 alloy with a beautifully-anodized finish without compromising their track-bred suspension geometry. The complete installation kit includes hardened-steel hinge pins, e-clips, and hardware.
Traxxas LED light kits are built tough, with factory fit and finish for easy installation. Designed specifically for Slash 4X4 models, the kit includes 4 brilliant white forward-facing LEDs and two rear-facing red LEDs to enhance rear visibility. The kit is fully waterproof, and includes everything needed for installation.Replacement part for these...
Use this data link cable to connect the 6550X telemetry expander 2.0 to the 6590 high-voltage power amplifier.
The plastic multi-tool can be used to loosen castle nuts as well as upper and lower shock caps.
Captured hollow balls (4) with 3x7x1 mm shims (2), 3x6x0.5 mm shims (4), and 3x7x2 mm shims (2)
Left and right caster blocks (C-hubs) with 4 kingpin bushings Replacement part for these models: Sledge®
Extreme Scale DetailThe Traxxas 4-Tec 3.0 Corvette Stingray set the standard for replica scale detail in 1/10 RC models. With so much attention devoted to the Stingray’s beautiful clipless body, it’s only fitting to offer an LED light kit for even greater realism. The Corvette Stingray LED light kit fits into the body’s color-molded lenses for a perfect...
Stub axle, aluminum, (blue-anodized) (1) (for use only with #7750X or 7896 driveshaft) Add a touch of style to your X-Maxx® or XRT® with this brightly-anodized aluminum stub axle. (for use with 7750X and 7896 8s-spec heavy duty driveshafts only)Replacement part for these models:X-Maxx®XRT®
Motor mounts (front and rear)/ pins (2) Front and rear motor mounts with pinsReplacement part for these models:X-Maxx®XRT®
Rebuild kit, steel constant-velocity driveshaft (includes pins for 2 driveshaft assemblies (for use only with #7750X driveshaft) Rebuild kit for use with 7750X heavy duty X-Maxx driveshafts. Kit includes pins for 2 driveshaft assemblies.Replacement part for these models:X-Maxx®XRT®
Suspension pin set, shock mount (front or rear, hardened steel), 4x25mm (2), 4x38mm (2) Hardened steel shock mount pin set includes 4x25 mm pins (2) and 4x38 mm pins (2)Replacement part for these models:X-Maxx®XRT®
Bumper, front Front bumperReplacement part for these models:X-Maxx®
Battery hold-down (2)/ foam pad (2) Battery hold downs (2) with foam pads (2)Replacement part for these models:X-Maxx®
Battery hold-down mounts, left (2)/ right (2)/ 3x18mm CS (4) Left and right battery hold down mounts (2) with 3x18 mm screws (4)Replacement part for these models:X-Maxx®
Spring pre-load spacers: 1mm (4)/ 2mm (2)/ 4mm (2)/ 8mm (2)
Screws, 4x35mm button-head machine (hex drive) (6) 4x35 mm button-head machine screws with hex drive heads. Set of six.Replacement part for these models:Maxx®Sledge®Unlimited Desert Racer®X-Maxx®XRT®
Screws, 4x20mm button-head machine (hex drive) (6) 4x20 mm button-head machine screws with hex drive heads. Set of six.