Etiquetas (Tags)
Catálogo
A carregar...
The ultimate treasure for both collectors and players, the Illumineer’s...
Left and right aluminum steering blocks combine total steering accuracy with bulletproof strength. Machined from solid 6061-T6 aluminum and protected with a brilliant anodized finish, these high-grade hop-up parts provide razor-sharp handling and high-tech style. Accessory part for these models: Maxx® Slash® Maxx®
Accessory part for these models: TRX-4® 1972 Chevrolet® Blazer® High Trail Edition™TRX-4® 1979 Chevrolet® Blazer®TRX-4® 1979 Ford® Bronco®TRX-4® Chevrolet® K10 High Trail Edition™TRX-4® Equipped with Traxx®TRX-4® Ford® Bronco®TRX-4® Ford® F-150® High Trail Edition™TRX-4® Land Rover® Defender®TRX-4® Sport High Trail Edition™TRX-4® SportTRX-4® Unassembled...
Traxxas’ aluminum front and rear camber links make it easy to add strength and adjustability to your Traxxas model. These aluminum turnbuckles come in a brilliant anodized finish for stunning good looks. The kit includes two front 39 mm turnbuckles (69 mm center to center) and two rear 49 mm turnbuckles (82 mm center to center) along with a matching 5 mm...
Ring gear, differential/ pinion gear, differential (machined)Heavy-duty differential ring and pinion gears are machined from high-quality steel for unsurpassed strength and durability. Available in standard, underdrive and overdrive configurations, they allow you to tune your TRX-4® for greater climbing agility.
Engineered for the full range of Traxxas 1/10 to 1/8 scale vehicles Use with TRX-4M foam stand (9794) for 1/18 scale modelsUse with Foam Inserts (8794) for LaTrax 1/18 scale and Traxxas 1/16 Scale modelsTough aluminum construction with a brilliant blue finishDual ball bearings for smooth 360° rotationLocking lever with 16 positionsNon-slip foam pads on...
Fits X-Maxx® and XRT®Tough aluminum construction with a brilliant blue finishDual ball bearings for smooth 360° rotationLocking lever with 16 positionsNon-slip foam pads on top and bottomPerfect for maintaining and storing your X-TruckPrevents flat-spotting of tires
Bumper D-rings, front or rear, 6061-T6 aluminum (red-anodized) (4)/ 1.6x5mm CS (with threadlock) (4)Add extra style to your TRX-4M® bumper with these red-anodized aluminum D-rings. D-rings also come standard with 9734X and 9735X front and rear aluminum bumpers. Includes 1.6x5 mm screws (4).
Fits TRX-4M DefenderBlack-anodized with machined edgesIncludes front and rear red-anodized D-ringsIncludes winch fairleadMachined pockets for factory running lightsIncludes bosses for trailer hitch mounting
Fits TRX-4M BroncoBlack-anodized with machined edgesIncludes front and rear red-anodized D-ringsMachined pockets for factory running lightsIncludes bosses for trailer hitch mounting
The aluminum motor mount is precision-machined from solid 6061-T6 alloy for extra rigidity and total power transfer in high-power brushless applications. The brilliant anodized finish features machined highlights for extra style.
Plate, motorThis brightly-anodized aluminum motor plate keeps your motor tight during intense high-flying action with a touch of style. Replacement part for these models:Ford Fiesta® ST RallyFord® Fiesta® ST RallyRustler® 4X4 BrushlessRustler® 4X4 VXLRustler® 4X4Slash 4X4 UltimateSlash® 4X4 Ultimate
Add strength and style to your X-Truck™ with these aluminum motor mounts. The mounts are machined from tough 6061-T6 aluminum for unbeatable toughness with a brilliant anodized finish and laser-etched logo. Genuine Traxxas accessories are made by Traxxas, for Traxxas, to guarantee a perfect factory fit every time. Aluminum Motor MountsMilled from...
Driveshaft, steel constant-velocity (shaft only, 96mm) (1)96 mm steel constant-velocity driveshaft Replacement part for these models:Unlimited Desert Racer®
Designed for power-hungry drivers who push their Sledge to the extreme, the heavy-duty 52-tooth Mod 1 (1.0-metric pitch) spur gear is machined from hardened steel for extra-long life. These let you fine-tune the performance of your Sledge. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult...
Developed specifically for the hard-hitting Drag Slash®, the Pro Series Magnum 272R upgrades key features of the standard Magnum transmission for maximum durability and next-level performance. A new low-profile design, 3.2 mm motor plate and hardened steel top shaft are just the beginning. The Pro Series Magnum 272R represents a complete performance...
190 mm steel CV driveshaft is a direct replacement for the X-Maxx® WideMaxx® suspension kit Replacement part for these models: XRT® Accessory part for these models: X-Maxx®
Accessory part for these models: Ford® F-150® Raptor R™ 4X4 Ford® Fiesta® ST Rally Rustler® 4X4 VXL Rustler® 4X4 Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4 Stampede® 4X4 VXL Stampede® 4X4
Traxxas aluminum steering blocks combine total steering accuracy with bulletproof strength. Machined from solid 6061-T6 aluminum and protected with a brilliant anodized finish, these high-grade hop-up parts provide razor-sharp handling and high-tech style.
Left and right green aluminum caster blocks improve the appearance, ruggedness, and control of your Traxxas model. The billet 6061-T6 aluminum construction adds strength and precision where you want it most. The brilliantly-anodized finish adds vibrant color to your vehicle and features a high-contrast laser etched TRX logo.
Traxxas aluminum shock towers are made from tough 7075-T6 aluminum for extra strength and support and finished off with brilliant anodizing for a touch of style. Our shock towers are precision-machined for a perfect factory fit to maintain your vehicle’s race-bred geometry. Includes body mount bracket, shock mounting posts, and screws.
Traxxas aluminum shock towers are made from tough 7075-T6 aluminum for extra strength and support and finished off with brilliant anodizing for a touch of style. Our shock towers are precision-machined for a perfect factory fit to maintain your vehicle’s race-bred geometry. Includes body mount bracket, shock mounting posts, and screws.
Traxxas aluminum stub axle carriers add the strength of 6061-T6 alloy with a beautifully-anodized finish without compromising their track-bred suspension geometry. The complete installation kit includes hardened-steel hinge pins, e-clips, and hardware.
Stub axle, aluminum, (blue-anodized) (1) (for use only with #7750X or 7896 driveshaft) Add a touch of style to your X-Maxx® or XRT® with this brightly-anodized aluminum stub axle. (for use with 7750X and 7896 8s-spec heavy duty driveshafts only)Replacement part for these models:X-Maxx®XRT®
Replacement part for these models: XO-1®
Accessory part for these models: XRT™
Accessory part for these models: XRT™ X-Maxx® XRT™
Steel upper bulkhead tie bar and lower bulkhead tie bars (2) Replacement part for these models: X-Maxx® XRT™
Spring retainer (adjuster), blue-anodized aluminum, GT-Maxx® shocks (4) (assembled with o-ringThis set of four aluminum spring retainers is great way to boost the performance and style of GT Maxx® shocks. Machined aluminum collars provide precise ride-height adjustments with an integrated O-ring to keep them right where you set them. They install in...
Wheel hubs, hex, aluminum (green-anodized) (4)/ 4x13mm screw pins (4)Lightweight and great looking, this set of four anodized aluminum wheel hubs feature a 17 mm splined design for extra grip on the wheels. Includes 4x13 mm screw pins (4). Accessory part for these models:Maxx®
Shock caps, aluminum (green-anodized), GTX shocks (4)/ spacers (8)Set of four green-anodized aluminum shock caps add strength and style to GTX shocks. Shock caps come with pivot balls installed and include spacers (8). Accessory part for these models:X-Maxx®XRT™
Shock caps, aluminum (green-anodized), GTX shocks (4)/ spacers (8)Set of four green-anodized aluminum shock caps add strength and style to GTX shocks. Shock caps come with pivot balls installed and include spacers (8). Accessory part for these models:X-Maxx®XRT™
Shock caps, aluminum (black-anodized), GT-Maxx® shocks (4)/ spacers (4) (for Sledge®)Set of four anodized aluminum shock caps adds strength and style to Sledge® GT-Maxx® shocks. Includes spacers (4). Accessory part for these models:Sledge®
This set of four aluminum spring retainers is great way to boost the performance and style of GT Maxx® shocks. Machined aluminum collars provide precise ride-height adjustments with an integrated O-ring to keep them right where you set them. They install in seconds and the bright anodized finishes at a touch style to your ride. Accessory part for these...
GT-Maxx® shocks provide super plush damping even on the roughest terrain. Extra-large diameter shock shafts move smoothly through the double X-ring seals for responsive damping. The machined aluminum bodies are brightly anodized to give your truck a touch of style. The threaded bodies and collars adjust ride height while the lower spring retainers are...
Single-chamber blue-anodized aluminum Resonator tuned pipe Replacement part for these models: Jato® Accessory part for these models: Nitro Slash Nitro Rustler®
1.9" aluminum beadlock rings mount to Traxxas 1.9” Method wheels for maximum tire bead grip and intense off-road action. Beadlock rings are sold in sets of four and include 2x10 mm mounting screws (48)
Heavy-duty 160 mm X-Maxx® steel constant-velocity driveshaft for 8s-spec heavy duty drivetrain. 6s truck upgrade also requires 7751X, 7754X, and 7768 or 7768R to complete installation. Replacement part for these models: X-Maxx®
TUBES 102 mm aluminum toe links are lighter than steel and stronger than titanium. Made from high-grade 7075-T6 aluminum, TUBES features a brilliant anodized finish for extra style. A machined groove identifies the left-hand threads and the included 7 mm aluminum wrench helps prevent marring while adjusting the turnbuckles. TUBES are sold in pairs and...
Set of eight 5 mm black flanged serrated steel nylon locking nuts Replacement part for these models: Maxx® Unlimited Desert Racer®
Replacement differential carrier with O-rings (2) and ring gear gasket fits front, rear, or center differentials. Replacement part for these models: Sledge®
Replacement 68 mm driveshaft for Traxxas 1/16 scale steel CV driveshafts (7151X).
Drive cup (1)/ 4x15.8mm screw pin (1) (for #8950X or 8996X steel CV driveshafts)Replacement steel drive cup with 4x15.8 mm screw pin. Fits 8950X or 8996X steel CV driveshafts. Accessory part for these models: Maxx®
The replacement Pro-Built® center differential comes completely assembled and ready to install into your Unlimited Desert Racer® with new bearings. Accessory part for these models: Unlimited Desert Racer®
Chassis, Revo® (3mm 6061 T-6 aluminum) (anodized blue)Replacement Revo® chassis is made from blue-anodized 6061-T6 aluminum. Fits original short-chassis Revo.
Accessory part for these models:X-Maxx®
Shocks, GTX, aluminum (red-anodized) (fully assembled w/o springs) (2)Huge oil-filled aluminum GTX shocks tame the toughest terrain with their silky-smooth damping performance. The aluminum shock bodies are threaded for easy ride height adjustments using the spring retaining collar. The bright anodized finish adds high-impact style to your X-Maxx and...
Lightweight and great looking, these 4 mm anodized aluminum flanged lock nuts are the perfect finishing touch for your vehicle. The serrated flange and nylon locking washer keep them snug on the wheel during even the most intense action.
Replacement part for these models:Revo® 1/10Summit 1/10
Shock caps, aluminum (hard-anodized, PTFE-coated), GTX shocks (4)/ spacers (8)Hard anodized, PTFE-coated aluminum shock caps add strength and style to X-Maxx GTX shocks. Replacement part for these models:X-Maxx®
Accessory part for these models:Drag Slash