Etiquetas (Tags)
Catálogo
A carregar...
The Digimon Card Game Limited Pack Billion Bullet LM06 is a special,...
The Bandai One Piece Card Game Official Sleeves Vol. 12 Imu are a pack...
The Bandai One Piece Card Game Official Sleeves Vol. 12 Gear 5 Luffy are...
The Bandai One Piece Card Game Official Sleeves Vol. 12 Sabo are a set...
The One Piece Card Game Official Sleeves Vol. 12 Gold D. Roger are...
The One Piece Card Game Official Sleeves Vol. 5: Portgas.D.Ace are an...
ONE PIECE Card Game Official Sleeves Vol. 5 Jewelry Bonney are card...
LIMITADO A 3 DISPLAYS POR CLIENTE.24 Boosters = DISPLAY
Possibilidade de alocações, não podemos garantir as quantidades da sua...
Possibilidade de alocações, não podemos garantir as quantidades da sua...
Possibilidade de alocações, não podemos garantir as quantidades da sua...
Possibilidade de alocações, não podemos garantir as quantidades da sua...
Possibilidade de alocações, não podemos garantir as quantidades da sua...
Possibilidade de alocações, não podemos garantir as quantidades da sua...
For use in tabletop RPG games (such as Dungeons & Dragons). This set...
Durante o Período Nanban, o Japão assistiu ao intercâmbio cultural e...
Set of ten 6x9x0.5 mm PTFE-coated washers Ford Fiesta ST Rally...
Steering bellcranks (left & right)/ draglink (6061-T6 aluminum,...
Take your X-Series vehicle to the next level with this aluminum...
Bumper, front (chrome)/ bumper mount (2)/ 3x10 BCS (2)
The Yu-Gi-Oh! The Chronicles Deck: The Fallen & The Virtuous...
O trabalho de entregador de pizzas sempre foi bastante monótono… até...
Subcategorias
Carros Traxxas
Set of ten 6x9x0.5 mm PTFE-coated washers Ford Fiesta ST Rally BL-2sModel #74154-4Raptor R 4X4 Ultimate (101177-4) Front Three-Quarter View (Gold)Ford Raptor R 4X4 UltimateModel #101177-4 Jato 4X4 BL-2sModel #90154-4 Jato 4X4 VXL-4sModel #90386-4 Rustler 4X4 VXLModel #67376-4 Slash 4X4 VXLModel #68386-4 Stampede 4X4 VXLModel #90376-4 T-Maxx 3.3Model...
Cover, gear (green-anodized 6061-T6 aluminum)
Steering bellcranks (left & right)/ draglink (6061-T6 aluminum, green-anodized) (fits X-Maxx®)
Take your X-Series vehicle to the next level with this aluminum differential housing. The housing is machined from tough 6061-T6 aluminum for maximum strength and protected with a brilliant anodized finish. Genuine Traxxas accessories are made by Traxxas, for Traxxas, to guarantee a perfect factory fit every time. (Fits front or rear)
Bumper, front (chrome)/ bumper mount (2)/ 3x10 BCS (2)
Body mounts (front & rear) (for clipless body mounting)
Replacement electronics tray includes receiver box cover, seals, stuffing tube clamp, and stainless hardware
Is it time to upgrade your Maxx® with an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint with pre-applied decals. ProGraphix bodies come fully-assembled and ready to mount with pre-installed body mounts, roof skid plate, and tailgate protector. Fits V2 Maxx® body (352 mm wheelbase).
The Maxx® wheelie bar is made from our toughest composite material and available in several eye-catching colors. The Maxx wheelie bar helps prevent backflips under full-throttle acceleration and flexes to absorb impacts on less-than-perfect landings. It also features a convenient handle to transport your Maxx to the next adventure.
Machined from tough 6061-T6 aluminum and hard-anodized in brilliant eye-catching colors, these wheelie bar wheels are the perfect finishing touch for your ride. Durable soft-compound tires reduce side-to-side movement for stable, consistent wheelies. Four 10x15x4 mm bearings are used to reduce friction and increase precision. Includes axles (2) and screws...
Bulkhead, rear (lower)/ motor mount washers (steel) (4)/ 4x18mm BCS (4)
Transmission gears, two speed (for #9891 transmission)
Machined from tough 6061-T6 aluminum and hard-anodized in brilliant eye-catching colors, these wheelie bar wheels are the perfect finishing touch for your ride. Durable soft-compound tires reduce side-to-side movement for stable, consistent wheelies. Four 10x15x4 mm bearings are used to reduce friction and increase precision. Includes axles (2) and screws...
Caster blocks (c-hubs), 6061-T6 aluminum (green-anodized), left & right Replacement part(s) for these models: X-MaxxModel #77096-4 X-Maxx UltimateModel #77097-4 X-Monster ChassisModel #77036-4 XRTModel #78086-4 XRT UltimateModel #78097-4
Left and right aluminum stub axle carriers improve the appearance, ruggedness, and control of your X-Series™ vehicle. The billet 6061-T6 aluminum construction adds strength and precision where you want it most. The brilliantly anodized finish adds vibrant color to your vehicle and features a high-contrast laser etched TRX® logo. Genuine Traxxas...
Steering blocks, 6061-T6 aluminum (green-anodized), left & right Replacement part(s) for these models: X-MaxxModel #77096-4 X-Maxx UltimateModel #77097-4 X-Monster ChassisModel #77036-4 XRTModel #78086-4 XRT UltimateModel #78097-4
Heavy-duty X-Series™ suspension arms utilize our latest proprietary composite material for extreme durability. Traxxas designed this composite specifically for high loads and hard landings with just the right amount of flex to resist breaking-even in cold weather. Whether you're sending it at the skate park, or launching off a ramp, these arms are built...
Heavy-duty X-Series™ suspension arms utilize our latest proprietary composite material for extreme durability. Traxxas designed this composite specifically for high loads and hard landings with just the right amount of flex to resist breaking-even in cold weather. Whether you're sending it at the skate park, or launching off a ramp, these arms are built...
Heavy-duty X-Series™ suspension arms utilize our latest proprietary composite material for extreme durability. Traxxas designed this composite specifically for high loads and hard landings with just the right amount of flex to resist breaking-even in cold weather. Whether you're sending it at the skate park, or launching off a ramp, these arms are built...
Give your Pro Scale® Sand Car a dramatic new look with this underbody LED light kit. Lights come pre-mounted to replacement nerf bars for easy installation. Light kit includes 3-volt power supply, wire harnesses, and mounting hardware.
Fender retainers (front & rear, left & right) (fits #8050 series bodies) Replacement part(s) for these models: TRX-4 Crawler KitModel #82216-4 TRX-4 Land Rover DefenderModel #82256-4
Camber link set (plastic/ non-adjustable) (front &rear) (black) Replacement part(s) for these models:BIGFOOT 4X4 BL-2sModel #67134-4 Rustler 4X4 BL-2sModel #67164-4 Slash 4X4 BL-2sModel #68154-4 Stampede 4X4 BL-2sModel #67154-4
Replacement stuffing tube comes assembled with liner Replacement part(s) for these models:Spartan SRModel #103076-4
Propeller shaft/ flex cable (fits Spartan® SR) (requires #10327 & 10385 for installation) Replacement part(s) for these models:Spartan SRModel #103076-4
its time to replace your Ford® Raptor R™ body or upgrade to an all new look? Ford® Raptor R™ clipless bodies come fully painted with pre-applied decals. Raptor R bodies come fully-assembled, trimmed, and ready to mount with pre-installed body accessories. Includes grille, tailgate, side mirrors, clipless mounts and decals. (requires 10124 and 10125 body...
Tires & wheels, assembled, glued (white dished 3.0" wheels, Response Pro 3.0" tires, foam inserts) (2)
Replacement rear planetary differential gear set includes 47-tooth ring gear and 12-tooth input gear. (Pinion gear does not work with optional center differential or slipper clutch)
Heavy-duty WideMaxx® suspension arms utilize our latest proprietary composite material for extreme durability. Traxxas designed this composite specifically for high loads and hard landings with just the right amount of flex to resist breaking—even in cold weather. Whether you’re sending it at the skate park, or launching off a ramp, these arms are built...
Is it time to upgrade your Hoss® with an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint with pre-applied decals. ProGraphix bodies come fully-assembled and ready to mount with pre-installed body mounts, roof skid, rear body support, and tailgate protector.
Replacement Disruptor® stuffing tube comes assembled with liner
Rebuild kit, GTX shocks (lower cartridge, assembled, pistons, piston nuts, bladders) (renews 2 shocks)
Body conversion kit, Slash 2WD/Slash 4X4 (includes front & rear latch mounts, latches, hardware) (for clipless mounting)
3x10 mm round-head self-tapping screws with Phillips drive heads. Set of six.
Body, Land Rover® Defender®, red (complete with ExoCage, fuel canisters, jack, spare tire mount & clipless mounting) Requires 8080R narrow inner fenders/.
Replacement white DCB M41 hatch is made from lightweight and strong ABS material. Includes decal sheet.
White Disruptor® hatch is made from lightweight and strong ABS material
Blue-anodized aluminum rudder mount and hinge pin includes stainless 4x14 mm stainless screws (4), 4 mm lock nuts (2), and 4x3 mm grub screw. Replacement part(s) for these models Disruptor VXL-4sModel #106064-4
Propeller, 42x59mm (steel)/ M4x0.7 NL (1) (requires installation of #5742X aluminum rudder mount for Spartan® SR)
Long red anodized-aluminum GT-Maxx® shock body. One per package. Replacement part(s) for these models: SledgeModel #95096-4
Large 5.3? diameter Maxx SC belted tires with foam inserts feature wide tread blocks for sure-footed traction on just about any surface
The Pro Scale® Aluminum Wheel System gives you maximum flexibility to create custom wheels for your Maxx Slash® and Unlimited Desert Racer®. These wheel washers are machined from ultra-tough 6061-T6 aluminum and beautifully anodized in eye-catching color. Pro Scale aluminum wheels are fully customizable with a complete line of wheel centers and rings to...
Front and rear inner fenders for bodies with clipless mounts. Includes rock light covers (8).
Body, Land Rover® Defender®, complete (clear, trimmed, requires painting) (includes grille, side mirrors, door handles, windshield wipers, ExoCage, spare tire mount, decals, window masks, clipless mounting, hardware)
Upper and lower suspension arms (1 each)